Mini Pry Bar

It’s not bad. But it’s highly overpriced. Also. The ratcheting function on the main unit is WAY too way to accidentally bump and flip into the opposite direction you’re trying to ratchet.

Good quality, does the job.

I love this little Pry Bar Tool. It has so many uses. I sharpened the edge to use as a scraper or chisel in addition to a pry bar. The hex wrench cut outs fit 10 mm and 8 mm hex nuts. The most common sizes I encounter on bicycles. FYI the picture and description on your website do not match each other. The picture references metric and the text imperial. The 8 mm is accurate however the 9 mm should state 10 mm. 9 mm and 6 mm are sizes I would likely never encounter. at least not where this tool is concerned. Two things that I believe would improve the tool. 1. Eliminate the smaller 6 mm hex portion and have only the 10 mm and 8 mm. This would provide 2 more sides of contact on an 8 mm nut. 2. Eliminate the small notch in the edge of the pry bar. It is too small to be effective prying nails or staples. This would provide a solid surface across the face of the edge if the user decides to sharpen the edge as I did. It would not take away its usefulness as a pry bar.