This is the product description text that will appear here.
Type
Right-Handed
Quantity
1
Dual face or end vise installation enables versatile workbench compatibility
Adjustable gib system virtually eliminates racking for precise clamping
Smooth sliding HSS tube resists twist and ensures consistent travel
Hard maple handle provides controlled, over-clamp-free clamping
Includes left and right handed variants for user preference
description
description
This is the product description text.
Vise Size
17 inches (432 mm) wide x 15 inches (381 mm) long x 4.5 inches (114 mm) thick
Minimum Mounting Area
13 inches (330 mm) deep x 7 inches (175 mm) wide
Minimum Benchtop Thickness Required
2 inches (50 mm)
Material
3/16 inch (4.7 mm) thick HSS with machine welded joints
Handle Length
11 inches (280 mm), 1 inch (25 mm) thick
Travel
5 inches (100 mm) with acme threaded rod
5.0
4 ratings
5
4
3
2
1
Best wood working Vise
I first used this vise in Rob’s class and was immediately sold on it. The long jaws grip the board tightly unlike any other wood working vise I have used and you only have to snug it up and give it a quarter turn and the piece is locked in tight. There is no slop in the vise at all and there is plenty of adjustment to tighten the vise up if there is any movement. Overall I don’t regret my purchase.
K
Kris · 11 days ago
Bench vice game changer
I just finished swapping this vice out on my Cosman work bench. What an incredible improvement over the Sjøberg! The design, engineering, and craftsmanship that Rob and his team put into their products really shows. This vice glides seamlessly and doesn’t rack over the full width of the vice while delivering the ability to handle deep stock. A real joy to use. Don’t forget to get a pair of Rob’s brass bench dogs to go with it.
S
Steve · 14 days ago
Amazing!!
This is truly worth the price. Robert is gonna buy a second, I'll consider it, but that will be sometime in the future. One thing to think about, if you watch the installation video, Rob uses a block as a fence to install and recommends a 1/8" taper to help with holding the workpiece firmly. DON'T taper the fence until after you install the vise or it will be out of square. I caught this before I drilled thankfully. Well packed for shipping. Smooth movement and tight holding power with lots of unobstructed arm to hold wide work pieces. Well worth it!!!!
The Cosman Workbench Vise is a unique design intended for new workbench builds or as a replacement vise for existing workbenches. It can be easily and quickly installed in either the face-vise or end-vise position on most workbenches. Comes in left-handed and right-handed variants.
Our vise design is inspired by the traditional shoulder v